// CE EN 341:2011 — CLASS C, TYPE 1 — ANCCP CERTIFICATION AGENCY, ITALY (NB 0302) +91 73969 57474
Safe SKYDROP TM
// SAFE SKYDROP — MODEL 061125

A controlled way down, when there is no way out.

A CE-certified high-rise escape descender for buildings in Hyderabad and across India. Fixed descent speed of 0.8–1 m/s, from heights up to 99 metres, with no electricity and no battery.

Drop the hero photograph: SafeSKYDROP unit mounted in its aluminium frame on an RCC wall, high-rise balcony behind
0.8–1 m/s
CONTROLLED DESCENT VELOCITY
30–100 kg
RATED LOAD RANGE
99 m
MAXIMUM DESCENT HEIGHT
No power
NO ELECTRICITY OR BATTERY
CE — EN 341:2011 CLASS C TYPE 1 EU 2016/425 — PPE CATEGORY III ANCCP NB 0302, ITALY ISO 17025 TESTED NCAGE (NATO) UNGM UEI (USA) D-U-N-S
// THE PROBLEM

Panic decides faster than rescue arrives.

Panic can lead to fatal jumps from height during fire emergencies. Lifts are unusable, stairwells fill with smoke, and external rescue depends on access, traffic and equipment reach. A personal controlled-descent route removes that dependency.

ROUTE
REACH
DEPENDS ON
READY WHEN
Stairwell
Full height
Smoke and crowd conditions
Until the route is blocked
Fire service ladder
Typically 30–70 m
Access, traffic, setup time
On arrival
Alarm and extinguisher
In-building
Electricity and training
Detection only — no exit
SafeSKYDROP™
Up to 99 m
Nothing but gravity
Always, at the descent point

// COMPARISON REFLECTS TYPICAL LIMITS OF EACH ROUTE — CONFIRM LOCAL FIGURES WITH YOUR FIRE OFFICER

// PRODUCTS

Two products, one evacuation problem.

// HOW IT WORKS

Four actions, no training in the moment.

01

Reach the descent point

The unit is mounted in its aluminium frame at the balcony, window or exit landing chosen during the survey.

02

Put on the harness

The harness is attached to the line by an EN 362 connector. No tools and no power are needed.

03

Step out and release

The sealed rotary brake takes the load immediately and regulates the speed. Nothing is held or operated during the descent.

04

Descend at a fixed rate

Descent stays between 0.8 and 1 m/s for any load between 30 and 100 kg, to the ground or to the rescue cushion.

See the full sequence
// CERTIFIED PERFORMANCE

Tested to EN 341:2011, reported line by line.

Every figure on this website comes from the EU-Type Examination certificate PPE-3193-23848-Cert and test report PPE 23731 RP 001, issued by ANCCP Certification Agency S.r.l., Notified Body 0302, Livorno, Italy.

Read the certification data
Model 061125
Standard EN 341:2011, Class C, Type 1
Regulation EU 2016/425, PPE Category III
Rated load 30–100 kg
Descent velocity 0.8–1 m/s
Maximum height 99 m
// WHERE IT IS USED

Buildings where the stairwell is the only exit.

// COMMON QUESTIONS

Asked before every enquiry.

Is SafeSKYDROP™ a pulley?

No. A pulley only redirects movement. SafeSKYDROP™ uses an internal rotary mechanism that actively regulates descent speed, holding it between 0.8 and 1 m/s.

Does it need electricity?

No. There is no motor, battery or building power in the descent path. An annual check is recommended, but the braking system is maintenance-free.

What weight range does it cover?

The certified rated load is 30 to 100 kg, tested and passed at both limits under EN 341:2011.

All questions

Book a survey for your building.

Hyderabad and Telangana, with supply across India on request.

Call WhatsApp Get a quote